HomespaceProductsspaceCustom MadespaceDownloadspaceSupportspaceAbout Us

CT08-01D/E ∼ CT64-01D/E
common program version upgrade information


Version information Reason of version upgrade Version upgrade file User's manual
1.15 17-02-16

CTxx-01D/E

Add "GSDSTRT" command CT08-64-01D_E_V1.15.S CT08-64-01E (rev. 7)
1.11 14-03-17

CTxx-01D/E

ECC flag, those are set by "FF_ECC x"(x:0,1,2), can be backupped in EEPROM. Bug fix for read out data error after ECC correction for model CT32 ∼ CT64-01E. CT08-64-01D_E_V1.11.S CT08-64-01E (rev. 3)
1.10 13-12-17

CTxx-01D/E

Bug fix. Because the value of the timer for "RDALH?" command can't be replied correctly. CT08-64-01D_E_V1.10.S CT08-64-01E (rev. 2)
1.09 13-09-13

CTxx-01D/E

With the addition of error-avoidance program for writing on and reading from 8GB FLASH memory, a comment of mechanism etc. was added. CT08-64-01D_E_V1.09.S CT08-64-01E (rev. 2)
1.08 13-06-06

CTxx-01D/E

When the data is collected on edge mode, the bug of first data becomes short during the gate pulse time was fixed. An effective and invalid setting of gate are became available for the command "GATEIN_EN", "GAEIN_DS" and "GATEIN?". Collecting of incremental data bacame available for the command "GT_ACQ_DIF", "GT_ACQ_FUL" and "GT_ACQ?". CT08-64-01D_E_V1.08.EXE CT08-64-01E
(Japanese version rev. 2)
CT08-64-01D
(Japanese version rev. 4)
1.07 13-03-05

CT08-01D/E

The bug of a content of the panel display was not saved in the CTxx-01D was fixed. CT08_64_V1.07.EXE CT08-64-01E
(Japanese version rev. 1)
CT08-64-01D
(Japanese version rev. 3)
1.06 13-01-17

CT08-01D/E

It changed into firmware common to CT08-64-01D and CT08-64-01E.

If you read within 50 ms after stop, the bug of the data just before stopping was read out was fixed.

CT08-64D_V1.06.EXE CT08-64-01E
(Japanese version rev. 1)
CT08-64-01D
(Japanese version rev. 3)
1.04 12-07-26

CTxx-01D

The command "ALL_REP_EN", "ALL_REP_DS" and "ALL_REP?" was added. The command "MIN10U_EN", "MIN10U_DS" and "MIN10U?" was added and the function of minimum RUN pulse output 10 ?s is described. Reacquisition of download time and revise descriptions. The description which should be distinguished about 8CH - 64CH was clarified. A communication failure of LAN was fixed. CT08_64D_V1.04.EXE User's manual
(Japanese version rev. 3)
1.03 12-05-29

CTxx-01D

The bug take trailing "K" as ×1000 result form address extension is fixed. For example "GSDRDXH?xxxxyyyyK" etc.

The bug of download didn't finish via high-speed download was fixed.

A communication failure with SPEC has been improved.

CT08_64D_V1.03.EXE User's manual
(Japanese version rev. 2)