HomespaceProductsspaceCustom MadespaceDownloadspaceSupportspaceAbout Us

Indefinite period maintenance


We (Tsuji Electronics Co., Ltd.) support our products for an indefinite period.

All of the design documents/drawings have been kept since its inception, and also will be kept in the future.

Therefore all our products that was shipped in the past are able to be maintain, and repair.

Actually, we repaired our product that was shipped more than 30years ago.


Contact: info2@tsuji-denshi.co.jp


Support


Hardware Update Information


Model Number The reason of change
PM16C-04XD (L)

The failure that a part of saved data replaces another data at the time of power-off was detected on November, 2008. The more externally-connected driver increase the probability of that failure. That is every one-hundredth in case of eight sets connecting. When you power up the device, it get started from the different count in the event of this failure.

There are the following methods as a stopgap measure.

1. You save the data before power-off, and write in the data after power up.

2. It places without turning off the device.

The fault is correctable by improving hardware. If you send the device after report a serial number, I will correspond immediately and will return it.


Contact: info2@tsuji-denshi.co.jp


Software Update Information


Stepping Motor Controller

Model Number Notes
PM16C-16
  • Version information can be read by "VER?" command via communication line.
  • Can update the firmware by yourself using new file that can be downloaded.See User's manual about the process to update the firmware.
PM16C-04XD (L)
  • Version information can be read by "VER?" command via communication line or setup screen on the front panel.
  • Can update the firmware by yourself using new file that can be downloaded. See User's manual for remote mode about the process to update the firmware.
PM16C-04, -04S
  • The number of Version Information is read by transfer command "VER?". And you can read the ROM mark on the top of ROM by opening a top cover.
  • Software Version Up is done by changing the inside ROM. If you wish to change the ROM, please tell us.
    • If you change ROM by your own side, we send ROM to you at free charge.
    • If you tell us to change ROM at our side, please send the Unit by your own and the fee is 200$ plus transportation charge.
PM16C-02N, -02Z
PM4C-06 Series
  • Version information can be read by "VER?" command via communication line.
  • Can update the firmware by yourself using new file that can be downloaded.See User's manual about the process to update the firmware.


Counter·Timer

Model Number Notes
CT08-01D - CT64-01D and CT08-01E - CT64-01E
  • Version information can be read by "VER?" command via communication line.
  • Can update the firmware by yourself using new file that can be downloaded.See User's manual about the process to update the firmware.
NCT08-01
NCT08-01B and CT08-01B
CT08-01C
CT08-02